Analysis of basic requirements for use of medical steel doors

　　According to the special situation of the hospital, the basic requirements for the use of medical steel doors need to meet the following points.

　　1. The door and door pocket must be fixed firmly

　　One of the main characteristics of hospital doors is that they are often opened and closed. Medical staff regularly check, inject, doctor's table, family check, and open and close the hospital door hundreds of times a day. If the door leaf and door frame are not firm enough, there will be problems in the use of the door; The design of hospital special door starts to consider this problem. The door leaf can be designed with two high carbon square steel pipes to prevent the frequent use of hospital special door leaf, which will lead to the deformation of the door leaf; The ward door frame is supported by solid wood to prevent the deformation of the door frame from affecting the use of the ward door.

　　2. Must be resistant to collision, scratch and corrosion

　　The inner door of the hospital will inevitably be hit by hard objects such as beds and wheelchairs. Sometimes the collision is very strong. In addition, the hospital is a public place, and many people will inevitably wait for violence. If the strength of the door is not enough, you can't help using these violence situations, which will inevitably lead to the internal door can't continue to be used. The hospital uses disinfectant to disinfect every day, which will corrode the door, easily peel off and fade. In addition, the sweat corrosion on people's hands is also very serious, and the hospital has a large flow of people. Excessive sweat will definitely fade the inner door. If the interior door cannot withstand these daily corrosion, the door will look very old and the decorative performance will be reduced. The new plate "HPL fireproof and antibacterial plate" is used for the hospital facade,

　　This material is not only resistant to scratching, engraving, collision and abrasion, but also has the characteristics of acid and alkali resistance, enabling the hospital door to open and close normally for 30000 times

　　3. Must be waterproof

　　The daily cleaning of the hospital is also a great test to the hospital door. If the door is not waterproof, the light ones will bulge, and the serious ones will become moldy and rotten. Therefore, the door must have good moisture resistance. The special door of the hospital has been well moisture-proof at the parts susceptible to moisture. The two vertical frames of the door frame are close to the ground, and the moisture-proof edge is made. The back plate of the door frame is made of moisture-proof plate, so that the hospital door can adapt to the climate environment in different regions.

　　The above is the analysis of the basic requirements for the use of medical steel doors. I hope you can refer to the above points when selecting medical steel doors.